Exporting Power Cables to the Middle East: Local Requirements, Regulations, Standards, and Certifications

By JianYunCable -

 Exporting power cables to the Middle East requires compliance with diverse regulatory frameworks, standards, and certifications specific to each country in the region. These requirements ensure safety, quality, and compatibility with local electrical systems and environmental conditions. The Gulf Cooperation Council (GCC) countries—Saudi Arabia, United Arab Emirates (UAE), Kuwait, Qatar, Bahrain, and Oman—share some harmonized standards, while other Middle Eastern countries like Iran, Iraq, and Israel have unique regulations. This guide outlines the key local requirements, regulations, standards, and certifications for exporting power cables to the Middle East, with a focus on achieving compliance for successful market entry as of September 2025.

Table of Contents

  1. Overview of Middle East Market Requirements
  2. Key Regulatory Bodies and Certifications
  3. Standards for Power Cables
  4. Country-Specific Requirements
  5. Practical Steps for Compliance
  6. Challenges and Solutions
  7. Conclusion

1. Overview of Middle East Market Requirements 

Power cables exported to the Middle East must meet stringent safety, performance, and environmental standards to ensure compatibility with local electrical grids (typically 220–240 V, 50 Hz for single-phase; 415 V for three-phase) and harsh environmental conditions (e.g., high temperatures up to 50°C, UV exposure, and dust). Key requirements include:

  • Certifications: Mandatory certifications like G-Mark (GCC), SABER (Saudi Arabia), ECAS (UAE), and others ensure compliance with regional and international standards.
  • Standards: Cables must adhere to international standards like IEC 60228 (conductors), IEC 60502 (low-voltage cables), or regional equivalents, often supplemented by local technical regulations.
  • Documentation: Certificates of Conformity (CoC), test reports, and declarations of conformity are required for customs clearance and market access.
  • Environmental Compliance: Compliance with RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) is often required, particularly for exports to markets influenced by EU standards.

Failure to meet these requirements can result in customs rejections, project delays, or legal penalties.

2. Key Regulatory Bodies and Certifications 

Several regulatory bodies oversee standards and certifications for power cables in the Middle East. The following are critical for exporters:

Country/RegionRegulatory BodyCertificationDetails
GCC (Saudi Arabia, UAE, Kuwait, Qatar, Bahrain, Oman)Gulf Standardization Organization (GSO)G-MarkMandatory for low-voltage electrical products (50–1000 V AC, 75–1500 V DC) under Gulf Technical Regulation BD-142004-01. Indicates compliance with safety and performance standards.
Saudi ArabiaSaudi Standards, Metrology and Quality Organization (SASO)SABEROnline platform for product registration and CoC issuance, mandatory since 2019 for electrical products. Requires annual renewal and retesting for critical component changes.
UAEEmirates Authority for Standardization and Metrology (ESMA)ECASEnsures compliance with UAE standards for electrical products. Accepts CB reports or EU CE test reports.
KuwaitKuwait Standards and Metrology Department (KOWSMD)COCRequires a CoC for each batch, verifying compliance with technical and safety standards.
QatarQatar General Organization for Standards and Metrology (QGOSM)CoCMandatory for electrical products, with specific voltage requirements (240 V or 220–240 V, 50 Hz).
IsraelStandards Institute of Israel (SII)SII ApprovalMandatory for products >9 V DC, based on CB test reports. Optional SII Mark requires factory inspection.
IranInstitute of Standards and Industrial Research of Iran (ISIRI)COICertificate of Inspection required for customs clearance, based on ISIRI standards.
IraqCentral Organization for Standardization and Quality Control (COSQC)CoCRequired for all regulated products, including cables, with random destination inspections.

3. Standards for Power Cables 

Power cables must comply with international and regional standards to ensure safety, performance, and compatibility. Common standards include:

  • IEC 60228: Specifies conductor classes (e.g., Class 5 for flexible stranded conductors) to ensure low resistance (e.g., <4.61 Îİ/km for 4 mm² copper).
  • IEC 60502-1: Covers low-voltage power cables (0.6/1 kV) with XLPE or PVC insulation, ensuring insulation integrity and temperature resistance (up to 90°C).
  • IEC 60332-1: Ensures flame-retardant properties to minimize fire risks.
  • EN 50525: Applies to low-voltage cables for general applications, often referenced in GCC markets.
  • UL 83 (optional): Relevant for markets accepting US standards, specifying thermoplastic-insulated wires.
  • RoHS/REACH: Ensures cables are free of hazardous substances, critical for EU-influenced markets like Turkey and parts of the Middle East.

Regional standards may supplement these, such as SASO standards in Saudi Arabia or QGOSM standards in Qatar, often aligning with IEC but including local adaptations (e.g., high-temperature performance).

4. Country-Specific Requirements 

Each Middle Eastern country has unique requirements for power cables, reflecting local electrical systems and environmental conditions:

Saudi Arabia

  • SABER Certification: Register products on the SABER platform, submit CB test reports or CE Declaration of Conformity (DoC), and obtain a CoC. Annual renewal is required.
  • Standards: SASO/IEC 60502-1 for low-voltage cables, SASO/IEC 60332 for fire safety.
  • Voltage: 220–240 V, 50 Hz single-phase; 415 V three-phase.
  • Documentation: Test reports, product specifications, and labeling in Arabic and English.

United Arab Emirates

  • ECAS Certification: Obtain through ESMA, often accepting CB or CE test reports. Requires registration and CoC.
  • Standards: ESMA/IEC 60502, EN 50525, and RoHS compliance.
  • Environmental: Cables must withstand high UV and temperatures (up to 50°C).
  • Labeling: Clear marking with voltage rating, conductor size, and ECAS logo.

Kuwait

  • COC Requirement: Each batch requires a CoC, issued by accredited bodies like Intertek, verifying compliance with KOWSMD standards.
  • Standards: Aligns with GSO/IEC standards, emphasizing flame-retardant properties.
  • Voltage: 240 V, 50 Hz single-phase; 415 V three-phase.

Qatar

  • CoC and Voltage Compliance: QGOSM requires a CoC for all electrical products, with specific voltage ratings (240 V or 220–240 V, 50 Hz).
  • Standards: QGOSM/IEC 60502, IEC 60332-1.
  • Testing: Random inspections at ports to verify compliance.

Bahrain and Oman

  • G-Mark Compliance: Mandatory for GCC markets, requiring GSO registration and testing by designated certification bodies.
  • Standards: GSO/IEC 60502-1, GSO 1067 for low-voltage cables.
  • Environmental: UV-resistant insulation (e.g., XLPE) for desert climates.

Israel

  • SII Approval: Required for cables >9 V DC, based on CB test reports. Optional SII Mark requires factory inspection.
  • Standards: IEC 60502, IEC 60228, with emphasis on safety for household and industrial use.
  • Documentation: Detailed technical files and DoC.

Iran

  • COI Requirement: Mandatory Certificate of Inspection per ISIRI standards, often requiring third-party inspection (e.g., SGS).
  • Standards: ISIRI 3569 (equivalent to IEC 60502) for low-voltage cables.
  • Documentation: Extensive, including test reports and quality certificates.

Iraq

  • CoC Requirement: COSQC mandates a CoC for each consignment, with random destination inspections.
  • Standards: Aligns with IEC 60502, IEC 60332, with focus on safety and quality.
  • Documentation: Production details (e.g., lot number), test reports, and transport documents.

5. Practical Steps for Compliance 

To successfully export power cables to the Middle East, follow these steps:

  1. Identify Market Requirements:
    • Research the target country’s standards, certifications, and voltage requirements (e.g., 240 V, 50 Hz for Qatar).
    • Confirm environmental needs (e.g., XLPE insulation for UV resistance in UAE).
  2. Select Compliant Cables:
    • Choose cables meeting IEC 60502-1, IEC 60228, and regional standards (e.g., SASO/IEC for Saudi Arabia).
    • Use materials like tinned copper (Class 5) and XLPE insulation for durability.
  3. Obtain Certifications:
    • Engage accredited testing bodies (e.g., TUV Rheinland, Intertek) for CB reports, G-Mark, or ECAS certification.
    • Register products on platforms like SABER (Saudi Arabia) or ESMA (UAE).
  4. Prepare Documentation:
    • Compile test reports, CoC, DoC, and technical files, including conductor size, insulation details, and compliance evidence.
    • Ensure labeling meets local requirements (e.g., Arabic/English for Saudi Arabia).
  5. Plan Logistics and Customs:
    • Use reliable freight forwarders experienced in electronics (e.g., DHL, FedEx).
    • Include HS codes (e.g., 8544 for insulated cables) and CoC with shipping documents to avoid customs delays.
    • Plan for peak periods (e.g., Chinese New Year) to prevent delays.

6. Challenges and Solutions 

ChallengeSolution
Diverse RegulationsPartner with consultants familiar with regional standards (e.g., SASO, ESMA).
Certification CostsUse dual-certified cables (e.g., TUV/IEC) to cover multiple markets, reducing testing costs.
Counterfeit CertificationsVerify certificates through official databases (e.g., TUV Rheinland, UL).
Customs DelaysEnsure complete documentation (CoC, test reports) and use experienced freight forwarders.
Environmental ComplianceSelect UV-resistant, high-temperature cables (e.g., XLPE, TPE) for Middle Eastern climates.

7. Conclusion 

Exporting power cables to the Middle East requires meticulous compliance with local regulations, standards, and certifications, such as G-Mark, SABER, ECAS, and CoC, tailored to each country’s requirements. By adhering to standards like IEC 60502-1 and IEC 60332-1, obtaining certifications from accredited bodies, and preparing thorough documentation, exporters can ensure market access and avoid costly delays. Addressing challenges through strategic planning, reliable suppliers, and proper logistics ensures cables meet safety, performance, and environmental demands, supporting successful solar and electrical projects across the region.

Source: JianYunCable.

Comments

Post a Comment

Popular posts from this blog

Understanding Voltage Levels and Cable Types in China's Power Industry

By JianYunCable -
Image
  In China's electrical power industry, voltage levels play a critical role in determining the type of cables used and their applications. Common voltage grades include 220V, 380V, 1kV, 10kV, 35kV, 110kV, 220kV, and 500kV. These are broadly categorized into three groups: low voltage, medium voltage, and high voltage. This article explores the differences between low-voltage and high-voltage cables, their structures, uses, production processes, and how to distinguish them in practice. Voltage Classifications in China Low Voltage (LV):  Typically 220V and 380V, primarily used for household electricity and small-scale applications. Medium Voltage (MV):  Ranges from 1kV to 35kV, serving as an intermediary for industrial and local distribution networks. High Voltage (HV):  Starts at 35kV and above (e.g., 110kV, 220kV, 500kV), mainly employed for long-distance power transmission. These classifications dictate the design and construction of cables to ensure safety and effic...
Read more

Comparison of Flame Retardant Standards for Electric Wires and Cables

By JianYunCable -
Image
  ​ Introduction With the increasing demand for  fire safety in electric wires and cables ,  flame retardant standards  play a critical role in preventing  fire hazards and the spread of flames . This paper compares the  domestic and international flame retardant standard systems , focusing on  GB/T 19666-2019  and  GB 31247-2014 , and analyzes the  key technical indicators, sample burning methods, and combustion test parameters . 1. Current Standards for Flame Retardant Cables 1.1 International Standards (IEC 60332 Series) IEC 60332-1-1:2015 ,  IEC 60332-1-2:2004 , and  IEC 60332-1-3:2004  focus on the  flame spread height  based on  non-metal content in cables . China adopts these standards through  GB/T 18380-2022 , which aligns with  IEC 60332 . 1.2 Chinese National Standards GB/T 19666-2019 : General rules for flame-retardant and fire-resistant electric wires and optical cables. GB 31247-2014 ...
Read more

What Are Trailing Cables and Where Are They Used?

By JianYunCable -
Image
  Table of Contents What Are Trailing Cables? Construction and Features Key Benefits of Trailing Cables Applications of Trailing Cables Limitations of Trailing Cables Trailing vs. Standard Cables Comparison Table Tips for Choosing Trailing Cables Conclusion What Are Trailing Cables? Trailing cables, also known as reeling cables or mining trailing cables, are specialized, highly flexible electrical cables designed to power mobile or frequently moving equipment in demanding industrial environments. Engineered to withstand mechanical stresses such as bending, twisting, stretching, and coiling, these cables ensure a reliable connection between power sources and equipment like excavators, cranes, and draglines. They are commonly used in industries such as mining, construction, and heavy manufacturing, where durability and safety are critical. Trailing cables comply with standards like AS/NZS 1747 (for mining cables) and IEC 60245, offering features like flame retardancy and grounding fo...
Read more

Understanding Low Voltage Power Cables: A Comprehensive Guide

By JianYunCable -
Image
Low voltage (LV) power cables are an essential component of modern electrical systems, facilitating the safe and efficient transmission of electricity for a wide range of applications. Defined as cables with a rated voltage not exceeding 0.6/1 kV (600 volts for DC or 1000 volts for AC), they are widely used in residential, commercial, and industrial settings. This article explores the key aspects of LV power cables, addressing common questions from multiple angles—design, applications, materials, and challenges—while providing clear answers backed by scientific principles and practical insights. What Are Low Voltage Power Cables ? Low voltage power cables are electrical cables designed to transmit power or signals at voltages up to 0.6/1 kV. Unlike high voltage (HV) cables, which handle large-scale power distribution (typically above 1 kV), or medium voltage (MV) cables (3-35 kV), LV cables cater to localized power needs, such as household wiring, industrial machinery, ...
Read more

What Is the Function of a Cable Armor Layer?

By JianYunCable -
Image
  The armor layer in electrical cables is a critical component designed to enhance the durability and safety of cables used in power distribution, industrial applications, and other demanding environments. Typically found in low-voltage (0.6/1 kV) and medium-voltage (3.6/6 kV to 26/45 kV) cables, the armor layer protects the cable’s inner components from external stresses, ensuring reliable performance and compliance with standards such as IEC 60502. This guide details the functions, types, applications, and considerations of cable armor layers, presented in a formal and structured manner. Table of Contents 1. Overview of Cable Armor Layer 2. Functions of the Armor Layer 3. Types of Armor Layers 4. Applications of Armored Cables 5. Practical Considerations 6. Challenges and Solutions 7. Conclusion 1. Overview of Cable Armor Layer The armor layer is a protective covering in electrical cables, typically placed between the inner insulation (e.g., XLPE, PVC) and the outer sheath (e.g.,...
Read more

5 Common Cable Faults and How to Prevent Them

By JianYunCable -
Image
  Electrical cables, used in low-voltage (0.6/1 kV) and medium-voltage (3.6/6 kV to 26/45 kV) power distribution, control, and communication systems, are susceptible to faults that can disrupt performance, cause outages, or pose safety risks. Identifying and preventing common cable faults is essential for ensuring reliability and extending cable lifespan, typically 25–30 years. This guide details five prevalent cable faults, their causes, and preventive measures, presented in a formal and structured manner. Table of Contents 1. Overview of Cable Faults 2. Common Cable Faults and Prevention 3. Testing and Maintenance Practices 4. Standards and Compliance 5. Challenges and Solutions 6. Conclusion 1. Overview of Cable Faults Cable faults occur due to defects in the conductor, insulation, or sheathing, often resulting from mechanical damage, environmental factors, or improper installation. These faults can lead to short circuits, open circuits, or signal degradation, impacting applicat...
Read more

4 AWG Wire: Definition, Specifications, Ampacity, and MM² Equivalent

By JianYunCable -
Image
  Table of Contents What is 4 AWG Wire? 4 AWG Wire Specifications Ampacity of 4 AWG Wire 4 AWG Wire in MM² Applications of 4 AWG Wire Summary of 4 AWG Wire Characteristics Tips for Selecting 4 AWG Wire Conclusion What is 4 AWG Wire? 4 AWG wire refers to a conductor sized according to the American Wire Gauge (AWG) system, a standardized method for measuring wire diameters in North America. The AWG system assigns smaller gauge numbers to thicker wires with greater current-carrying capacity. A 4 AWG wire is a relatively large conductor, suitable for high-current, low-voltage applications in residential, commercial, and industrial settings. It is commonly made of copper or aluminum, with copper offering higher conductivity and aluminum providing cost savings for larger installations. 4 AWG wire is used in applications requiring significant power delivery, such as service entrances or heavy equipment, as discussed in prior articles on AWG, 2 AWG vs. 2/0 AWG, and medium voltage cables. 4...
Read more

Medium Voltage Cable Life Expectancy: Factors and Insights

By JianYunCable -
Image
Table of Contents What Are Medium Voltage Cables? What Is the Life Expectancy of MV Cables? Factors Affecting MV Cable Life Expectancy Single-Core and Multi-Core MV Cables MV Cable Insulation Comparison Table Maintenance Tips to Extend MV Cable Life Conclusion What Are Medium Voltage Cables ? Medium voltage (MV) cables are electrical cables designed to transmit power at voltages ranging from 3.6 kV to 35 kV, bridging the gap between low voltage (up to 1 kV) and high voltage (above 50 kV) systems. They are critical for power distribution in urban and rural networks, industrial facilities, mining operations, and transportation systems like railways. MV cables typically feature copper or aluminum conductors, insulation (often cross-linked polyethylene, or XLPE), and protective layers like metall...
Read more

Cable Insulation Breakdown: Causes and Long-Term Solutions

By JianYunCable -
Image
  Insulation breakdown in electrical cables is a critical fault that compromises the performance, safety, and reliability of power distribution, control, and communication systems. This phenomenon, which can lead to leakage currents, short circuits, or complete system failure, is particularly concerning in low-voltage (0.6/1 kV) and medium-voltage (3.6/6 kV to 26/45 kV) cables. Understanding the causes and implementing long-term solutions is essential for ensuring a cable lifespan of 25–30 years and compliance with standards like IEC 60502. This guide provides a comprehensive analysis of insulation breakdown, its causes, and effective prevention strategies, presented in a formal and structured manner. Table of Contents 1. Overview of Insulation Breakdown 2. Causes of Insulation Breakdown 3. Long-Term Solutions for Prevention 4. Testing and Monitoring Techniques 5. Standards and Compliance 6. Challenges and Solutions 7. Conclusion 1. Overview of Insulation Breakdown Insulation break...
Read more

Understanding LSOH Cables: Safety and Applications

By JianYunCable -
Image
  Table of Contents What Are LSOH Cables? How Are LSOH Cables Constructed? LSOH vs. PVC Cables: Key Differences Single-Core and Multi-Core LSOH Cables What Are the Applications of LSOH Cables? LSOH vs. PVC Comparison Table Safety and Selection Tips for LSOH Cables Conclusion What Are LSOH Cables? Low Smoke Zero Halogen (LSOH) cables, also referred to as LSZH, LS0H, LSFH, or OHLS, are specialized electrical cables designed to enhance safety during fire events. Unlike traditional cables, LSOH cables emit minimal smoke and no halogen gases when exposed to flames, reducing risks of toxic inhalation and equipment corrosion. These cables are critical in environments where fire safety is paramount, such as public buildings, transportation systems, and confined spaces. Their halogen-free composition makes them an environmentally friendly choice, aligning with modern safety and sustainability standards. How Are LSOH Cables Constructed? LSOH cables are engineered with materials that prioriti...
Read more

All Cable Products-Henan Province Jianyun Cable Co., Ltd.

Loading...